Professional Flexible Materials Automated Cutting Solutions.
High-Speed Oscillating Tool EOT
| Cutting speed | 300-1200mm/s |
| Motor speed | 17000-21000RPM |
| Max thickness | ≤25mm (according to different materials) |
| Cutting materials |
KT board, display board, solid cardboard, rubber, leather, low density PVC expansion sheet within 1cm |
| Blade Angle | 0.64mm/1mm |
The Oscillating tool adopts the motor imported from Switzerland. It is Widely used in cutting within 10mm PVC, KT board and other medium-density material, Various types of blades, 45°, 26°, 16° for choice to cut different materials.
Universal Cutting Tool UCT
| Cutting speed | 300-1500mm/s |
| Max thickness | ≤25mm (according to different materials) |
| Cutting materials |
PP paper, self-adhesive, magnetic material, vinyl, honeycomb, |
The tool itself without motor or other power output, more suitable for full-through cutting PVC materials below 5mm and rolls, light box cloth and other flexible materials, universal cutting tool is more widely used, according to the different materials to choose different angles of the blade, and determine the angle of the blade is the thickness of the material itself.
Kiss-cut Tool KCT
| Cutting speed | 300-1500mm/s |
| Max thickness | ≤25mm (according to different materials) |
| Cutting materials |
Self-adhesive, vinyl, decorative film, reflective film, etc. |
Kiss-cut tool can automatically adjust the depth of the tip to do only cut through the upper half of the material without damaging the lower half of the material, mainly used in labeling, stickers and other materials cutting, cutting speed can reach the fastest 1m / s, can replace the work of the word cutter.
V-cut Tool VCT
| Cutting speed | 300-600mm/s |
| Max thickness | ≤25mm (according to different materials) |
| Cutting materials |
KT board, PVC, corrugated board, honeycomb board, |
The V-CUT tool is perfect for cutting moderate hard PVC, corrugated, and honeycomb panels to produce complex structural designs. The tool can be set for cutting 4 different angles for different cutting requests, such as 15°, 30°, 45°, and 60°.
Foam Cut Tool FCT
| Cutting speed | 100-500mm/s |
| Max thickness | ≤50mm (according to different materials) |
| Cutting materials |
EVA, foam, sponge, etc. |
|
Motor speed |
17000RPM/M |
Through the principle of high-frequency vibration to the material for full-permeability cutting, mainly quoted in the internal partition of the carton or advertising industry foam characters cutting, the maximum cutting thickness of 50mm, foam knife tool power supply is 38V.
Pneumatic oscillating tool POT
| Cutting speed | 50-300mm/s |
| Max thickness | 50mm (according to different materials) |
| Cutting materials |
foam, sponge, EVA, etc. |
|
Air pressure |
<0.7MPa |
|
Knife SPC. |
1*6*48mm |
|
Amplitude |
8mm |
The pneumatic oscillating tool is an air driven tool at high frequency to cut materials. Stroke is adjustable up to 8mm, and is capable of cutting high density materials.
Dotted Creasing Wheel DCW
| Cutting speed | 800-1000mm/s |
| Max thickness | ≤7mm (according to different materials) |
| Cutting materials |
Cardboard/corrugated paper, etc. |
Cut in any direction with a point-breaking knife to form easy-tear lines, gears can be customized.
Creasing Tool
| Cutting speed | 800-1500mm/s |
| Max thickness | ≤7mm (according to different materials) |
| Cutting materials |
Cardboard / PET board /corrugated paper |
Creasing wheel tool is used to do the creasing on the corrugated board, card board,hollow sheet materials, different creasing wheels for different materials can make perfect creasing with 4 different size wheels.
Pre-pressure Wheel
Pre-pressing wheels can effectively prevent materials from moving or warping, such as corrugated cardboard.
Water-Cooled Milling Tool MT
| Cutting speed | 100-500mm/s |
|
Motor speed |
maximum60000RPM |
|
Spindle power |
1.5KW |
|
Max thickness |
≤25mm (according to different materials) |
|
Cutting materials |
Within 25mm acrylic, aluminum, composites, MDF board, plastic, hard foam, and other high-density materials |
The milling tool has a perfect perfomance on the hard materials, such as acrylic, Aluminum composite panel, MDF and other high density material, it can do precise engraving like the kiss cut for different depth. And it is also equipped with the dust cleaner and chiller.
Mini Oscillating Tool EOT
| Cutting speed |
300-1000mm/s |
|
Motor speed |
17000RPM |
|
Max thickness |
≤25mm (according to different materials) |
|
Cutting materials |
KT board, display board, solid cardboard, rubber, leather, low-density PVC expansion sheet within 1cm |
The Oscillating tool adopts a motor imported from Switzerland. It is widely used in cutting within 5mm PVC, KT board, and other medium-density material. Various types of blades, 45°,26°,16°, for choice to cut different materials.
Mini Universal Cutting Tool UCT
| Cutting speed |
300-1200mm/s |
|
Max thickness |
≤25mm (according to different materials) |
|
Cutting materials |
PP paper, self-adhesive, magnetic material, vinyl, honeycomb, electronic film, within 5mm PVC expansion sheet, etc. |
The tool itself without motor or other power output, more suitable for full-through cutting PVC materials below 5mm and rolls, light box cloth and other flexible materials, universal cutting tool is more widely used, according to the different materials to choose different angles of the blade, and determine the angle of the blade is the thickness of the material itself.
Graphtec Blade
Graphtec Blade tool has two types of knives, 0.9mm and 1.5mm, for half-cutting adhesive-backed materials such as stickers.
Driving Rotary Tool DRT
| Cutting speed |
800-2000mm/s |
|
Max thickness |
≤10mm (according to different materials) |
|
Cutting materials |
Thin fabrics, polyacrylic, balloon silk, banner cloth, coated banner, etc. |
|
Configuration blade |
Φ24 Φ28 Φ32 |
By high-speed rotation of the blade to cut the material, mainly for some non-woven fabrics banner cloth or other breathable materials, cutting does not take away the material, no burr, relatively fast, but can not be applied to the corner of the material is relatively small.
Driving Rotary Tool DRT
| Cutting speed |
800-2000mm/s |
|
Max thickness |
≤10mm (according to different materials) |
|
Cutting materials |
Thin fabrics, polyacrylic, balloon silk, banner cloth, coated banner, etc. |
|
Configuration blade |
Φ24 Φ28 Φ32 |
By high-speed rotation of the blade to cut the material, mainly for some non-woven fabrics banner cloth or other breathable materials, cutting does not take away the material, no burr, relatively fast, but can not be applied to the corner of the material is relatively small.
